Free shipping to 70 countries. Tracking information will be updated when the board arrived to the destination country.

Hobbywing NEW Screen Wireless Remote (Use for all Hobbywing ESC)

Hobbywing NEW Screen Wireless Remote (Use for all Hobbywing ESC)

Regular price $79.99 Sale price $59.99

Secure Checkout

 Thank you for purchasing this HOBBYWING product! Any improper use may cause malfunction and damage to devices, so please make sure to read through this manual before use and strictly abide by the prescribed operating procedures. We are not liable for any liability arising from the use of this product, including but not limited to the compensation for incidental or indirect loss. We also do not bear any responsibility for unauthorized modification of the product. We have the right to change the product design, appearance, performance and use requirements without notice.

 Product Specification                                                                                              

Model

Remote for Skateboard ZYD7002

Battery voltage/capacity

3.7V/400MAH

Charging interface

Micro USB

Charging time

1H

Communication mode

2.4G

Distance of remote control

40m(空旷地带Open area)

Weight

--0.2

 

02 Interactive mode                                                                                            

Diagram of remote control:

 

03:Function and operating instructions                                                                                                           

  • Power on 

     Press “button A” on the remote control for 1 second to power on. The remote control will vibrate shortly and enter into connection mode. The OLED screen displays the main interface or unconnected hint according to the connection state. Then press the power button of the skateboard for 0.2 seconds to enter into connection mode.

    Note: The normal state after the connection is that the OLED screen displays the main interface and indicator light of the skateboard is constantly on.

      2)  Power off

    Manual off: Press “button A” for 2 seconds to power off (The skateboard cannot be powered off under speeding). The remote control vibrates shortly, press power button for 1 second to power off.  

    Note: If the skateboard is powered off but the remote control is not powered off and in the state of connection, the screen of remote control displays not connected, and the remote control vibrates shortly to remind. If the remote control powers off in the state of connection, the skateboard will start to brake and power off after 5 minutes of standstill.

    Automatical off: The remote control and skateboard will power off automatically if not being operated within 5 minutes if the skateboard is at rest.

  • 3)  Connect and match(Have been matched well after leaving the factory)

        Both remote control and skateboard are powered off, first press button A for 5 seconds, the indicator light is red and flashes quickly, reminding enter into matching state, press “button A” for 5 seconds again, the screen displays matching and enter into matching mode. The remote control displays matching successfully, with two short vibrations and once long vibration means completing matching. After that, the red indicator light of the skateboard is constantly on and can be used. After matching remote control, we need to select speed, mileage unit and motor diameter, detailed operation method. Button B to switch option. Button A to confirm. The remote control will enter into the main function interface after the second motor diameter chosen.   

     4)  Battery indicator

        The battery indicator of remote control: There is 5 grid power. After power on, if the battery of remote control is less than 10%(It can be used for 30 minutes at most), the screen of remote control indicates that the power is less than 10%, with a double long vibration. When the battery is only 5%(It can be used for 15 minutes). The remote control reminds the battery is less than 5% again, with a double long vibration. When the battery is lower than the safe voltage(3.4V) and connected with the skateboard, if the skateboard stops, the remote control vibrates once and powers off automatically.

        The battery indicator of skateboard: There is 5 grid power. When the battery of the skateboard is lower than 25%, the screen of remote control indicates the battery is lower than 25%, with a double long vibration. When the battery of the skateboard is lower than 10%, the remote control will indicate the battery is lower than 10%, with a double long vibration. When the voltage is lower than safe voltage, close power output, brake immediately at this time.  

    5)  Throttle/Brake control

    Push forward “finger dial of throttle” to control forward. Pull backward “finger dial of throttle” to control brake.

    Make sure the finger dial of the throttle is in neutral position before power on, or else it will affect the user experience. The screen will remind you to return throttle in a neutral position if it is not when power on. Please operate as per instruction.    

     6)  Switch the direction of skateboard

        In the state of forward, double click “Button B”, the remote control will short vibrate once(short vibrate for 100ms, the same below), the direction icon changes to“Backward arrow”;

        In the state of backward, double click “Button B”, the remote control will short vibrate once, the direction icon changes to“Forward arrow”.

        Note: This operation will be valid when the throttle trigger is in a neutral position(zero throttles) and the speed is less than 3km/h.   

    9)   Gear switch

         Short press button B, the remote control switches to the next gear, with a short vibration. The gear icon will change accordingly.

        Note: This operation will be valid when the throttle trigger is in a neutral position(zero throttles).  

     

    11) Charging

    ① Charging remote control: When charging the remote control, it vibrates short. The remote control screen displays the charging progress in real-time in the form of flowing water lightly;

  • Note: It can not be operated when charging the remote control. It will automatically power off after unplug the charging wire and short vibrate once.

    ② Charging battery of skateboard: When power off, the skateboard enters into the charging state automatically if connects the charger. The red indicator light is on. When power on, connect the charger to enter into charging state, the red indicator light is on, it will automatically power off after unplug the charging wire.

    Note: When in the state of charging, part of the motor and ESC will stop working if the skateboard is not connected with remote control, or does not accept operation instruction.

     

    04 Malfunction warning instruction:                                                                        

     Battery voltage warning

    • If the battery of remote control is less than 10%(It can be used for 30 minutes at most), the screen of remote control indicates that the power is less than 10%, with a double long vibration. When the battery is only 5%(It can be used for 15 minutes). The remote control reminds the battery is less than 5% again, with a double long vibration. When the battery is lower than the safe voltage(3.4V) and connected with the skateboard, if the skateboard stops, the remote control vibrates once and powers off automatically.
    • When the battery of the skateboard is lower than 25%, the screen of remote control indicates the battery is lower than 25%, with a double long vibration. When the battery of the skateboard is lower than 10%, the remote control will indicate the battery is lower than 10%, with a double long vibration. When the voltage is lower than safe voltage, close power output, brake immediately at this time.

        Note: when the battery of remote control or skateboard starts to remind for the second time, you’d better stop using it and chare related devices to avoid damage lithium battery due to over-discharge.

     

    • Signal loss warning

            When the signal is lost suddenly, the screen of the remote control indicates disconnection, with a short vibration. If the skateboard is accelerating, first the acceleration will stop slowly, then brake slowly automatically. If the skateboard is not accelerating, it will brake slowly. If the signal is lost, the remote control will search the device of the skateboard, if it succeeds in searching and reconnecting, the remote control will short vibrate, the brake will be canceled and return to normal operation.

     

    • Lock-up warning

            When the motor is lock-up or completely struck, the remote control will short vibrate continuously and intermittently,      the screen of remote control indicates lock-up. If that happens, the user should stop running skateboard and check whether there is foreign matter stuck in it, clear the foreign matter and run it again.

     

    • Overheating warning

            When the operating temperature of the motor is higher than 100℃ or lower than 0℃, the remote control vibrates and the screen

            Indicates overheat and the motor will stop working.

            Note: The user should pay attention to the temperature of the motor. Stop using if the operating temperature of the motor is high, reuse and after the temperature reduces.

     

    • Overcurrent warning

            When the operating current of the motor exceeds the value allowed, the screen of remote control indicates overcurrent, the motor

            Stops working.

            Note: Close the skateboard and repower on. It can be used after the current returns to normal.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)